Spruce Controller Settings and Location

General settings

Change controller and location settings in the Device Setup menu and then tap or click on the controller to be edited.  The settings included under general settings are:

  • Controller name – this is the displayed name of the controller
  • Enabled zones – these zones will be displayed across the web app, otherwise they are hidden and disabled
  • Enabled Rain or Flow sensors – rain sensors and flow sensors are turned on here
  • Preset manual run time – sets the time for automatic shutoff when a zone is turned on manually from the controller
  • Pump or Valve delay time – sets the time between zones turning off and then on when a schedule is running

Location settings

The location sets the longitude and latitude of the controller and the resulting:

  • Weather location data
  • Time, time zone and daylight savings

 

app.spruceirrigation.com-devices(iPhone 6 Plus) (2) Configure_Controllerapp.spruceirrigation.com-devices(iPhone 6 Plus) (4)

Was this article helpful?

Related Articles